National Fountains

1. All National Fountains products are designed and built to be installed and operated as a complete system. Any alterations to or substitution for items in this system, unless allowed by these installation instructions, will void the Underwriters Laboratories Listing and will void the product warranty. It may also create a hazardous installation.
2. Risk of electrical shock. Do not operate this unit dry unless testing for proper rotational/ mechanical function no longer than 30 seconds. If this unit has been inadvertently operated out of the water, the unit must be service by a qualified person before being returned to service.
3. Improper installation, operation, service, repair, maintenance or alteration of this product may result in property damage or bodily injury.
4. Turn off electrical power at disconnect switch or service panel before servicing this unit.
5. Risk of electric shock - this pump is supplied with a grounding conductor. To reduce the risk of electric shock, be certain that it is connected only to a proper ground. Use a copper conductor of the correct size from the grounding terminal in the control box to a grounding connection in the service panel.
6. Risk of electric shock - this pump has not been investigated for use in swimming areas.
7. Only qualified personnel shall service and install National Fountains pumps. Installation and service must be in accordance with state and local codes. This unit is intended to be operated only after it is properly installed, anchored and wired.

CAUTION

1. Your pump is provided with flexible underwater cable and strain relief, DO NOT REMOVE, electrical shock and/or damage to your unit could occur.
2. Risk of electrical shock. Do not remove the wire harness from the pump housing or underwater disconnect. Do not connect conduit to pump.

NOTE:

1. Every National Fountain unit is fully inspected and produced in accordance with applicable standards for safety, and are listed by Underwriters Laboratories, Inc. for safety in the USA and Canada.
2. Save and pass these installation, anchoring and operating instructions to subsequentowners. The information provided is intended to notify and warn them about making unsafe modifications, repairs or using unauthorized parts or repair facilities.