|
FOUNTAIN LIGHTING INSTRUCTIONS
LIGHT FIXTURE ASSEMBLY INSTRUCTIONS
FIGURE 1
-
Place light bracket in mating cavity on the underside of the fountain float as shown in figure 1.
-
Insert 3/8" ss bolt and washer into the light bracket as shown in figure 1.
-
Secure the light bracket from the bottom with a 3/8" locking nut and washer.
-
Tighten the nut using (2) 9/16" wrenches or pliers. DO NOT OVER TIGHTEN.
ATTACH LIGHT AND HOUSING TO THE LIGHT BRACKET
FIGURE 2
-
Allow the retaining clips to be in the "open" position. The clips are positioned without the use of tools.
-
Insert the light housing from the top down.
-
When the light housing is seated into the bracket, turn the retaining clips to ensure the housing is locked as shown in figure 2.
|
